Si-tex Vector Pro G2 GPS Compass
Model: VECTOR PRO G2
- The rugged enclosure combines GPS’ Crescent Vector board and two multipath-resistant antennas for simple installation
- The half-meter length smart antenna mounts easily to a flat surface or pole
- The stability and maintenance-free design of the Vector Pro replaces traditional gyrocompasses at a fraction of the cost
- IMO Wheelmarked for Commercial applications
Experience superior navigation from the accurate heading and positioning performance available with the Vector Pro G2 Series GPS Compass.
Specifications
GPS SENSOR SPECIFICATION | |
Receiver Type | Twin Receivers w/ L1, C/A code, with carrier phase smoothing |
Channels | Two 1?channel, parallel tracking, (Two 10- ?channel when tracking WAAS) |
Update Rate | Standard 20 Hz Adjustable (position and heading) |
Horizontal Accuracy | < 0.6 m 95% confidence (* < 2.5m 95% confidence (aiutonomous, no SA)** |
Heading accuracy | <0.3° rms |
Pitch/roll accuracy | < 1° rms |
Rate of turn | 90°/s max |
Start up time | < 60s typical |
Heading fix | < 20s |
Satellite reacquisition | < 1s |
Beacon Sensor Specifications (G2B version) | |
Channels | 2-channel parallel tracking |
Frequency range | 283.5 to 325 kHz |
Operating modes | Automatic (signal strength or range) and manual |
Compliance | IEC 611 08-4 beacon standard |
Communications | |
Srial ports | 2 full duplex RS-232 and 2 half duplex RS-422 |
Data I/O protocol | NMEA 0183 |
Enviromental | |
Operating temperature rage | -30°C to +70°C |
Humidity | 100% non condensing |
Input voltage | 9-36vDC |
Power consumption | <5w |
Isolation | Power supply isolated fromserial ports |
Mechanical | |
Dimensions | 23.6″ x 6.3″ x 7.1″ |
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.