,

JL Audio XDM Marine Amplifier 3-Channel 500 Watt 12v

$649.99

JL Audio
Model: 010-03343-00

Availability: 2 in stock (can be backordered)

JL Audio XDM500/3 3 Ch. Class D, Car/Marine System Amplifier, 500 W

Model: XDM500/3

Small enough to fit in just about any tight space application, the XDM500/3 is the perfect amplifier for a simple audiophile-grade, subwoofer / satellite system. With its three channels of versatile output, you can drive a pair of quality component speaker systems with plenty of clean power, while also delivering a stout 300 W to your subwoofer system. The technology that makes this much power possible in such a small chassis is our advanced NexD™ switching amplifier design.

Suitable for car or boat installations, the XDM500/3 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades.

The XDM500/3 includes a 12 dB / octave high-pass filter for its main channels, plus a variable slope low-pass filter for its subwoofer channel. Both filters offer continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver’s seat or helm.

Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.

Specifications

Rated Continuous (RMS) Power @ 14.4 V
Main Channels @ 4 ? 75 W RMS x 2
Main Channels @ 2 ? 100 W RMS x 2
Main Channels – Bridged @ 4? 200 W RMS x 1
Subwoofer Channel @ 4 ? 180 W RMS x 1
Subwoofer Channel @ 3 ? 240 W RMS x 1
Subwoofer Channel @ 2 ? 300 W RMS x 1
Subwoofer Channel @ 1.5 ? N/A
Rated Continuous (RMS) Power @ 12.5 V
Main Channels @ 4 ? 60 W RMS x 2
Main Channels @ 2 ? 90 W RMS x 2
Main Channels – Bridged @ 4? 180 W RMS x 1
Subwoofer Channel @ 4 ? 180 W RMS x 1
Subwoofer Channel @ 3 ? 240 W RMS x 1
Subwoofer Channel @ 2 ? 300 W RMS x 1
Subwoofer Channel @ 1.5 ? N/A
Frequency Response (Main Channels) 12 Hz – 22 kHz (+0, -1dB)
Frequency Response (Subwoofer Channel) 10 Hz – 1 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 4 ? >120 / 50 Hz
Damping Factor @ 2 ? >60 / 50 Hz
THD+N @ Rated Power (Main Channels) <1% @ 2 ? per Ch.
THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ? per Ch.
Input Voltage Range @ RCA Inputs 200 mV – 4 V RMS
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Rating 50 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s): Channels 1 & 2 (front) High-Pass only
Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave
Filter Frequency Range: Channels 1 & 2 (front) 50 Hz – 500 Hz
Filter Mode(s): Channels 3 & 4 (rear) N/A
Filter Slope(s): Channels 3 & 4 (rear) N/A
Filter Frequency Range: Channels 3 & 4 N/A
Filter Mode(s): Subwoofer Channel Low-Pass only
Filter Slope(s): Subwoofer Channel 12/24 dB/octave
Filter Frequency Range: Subwoofer Channel 50 Hz – 500 Hz
Detented, Calibrated Filter Freq. Potentiometers Yes
Filter Defeat Function Yes
Infrasonic Filter: Subwoofer Channel none
Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant)
Remote Level Modes Sub Ch. or All Channels
Channel Input Mode Switch Yes (2/4 ch.)
Pass-Through Preamp Output Buffered
Source Channel Selection for PreOuts Yes (1&2/Sum/Sub)
Height 2.05 in / 52 mm
Width (W) 8.52 in / 216 mm
Depth (D) 7.09 in / 180 mm
Net Weight 4.8 lb / 2.18 kg

What’s in the Box:

  • XDM500/3 Amp
  • Wrench
  • Badge
  • WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.

Weight 6.000000 lbs
Shopping Cart
JL Audio XDM Marine Amplifier 3-Channel 500 Watt 12v
$649.99

Availability: 2 in stock (can be backordered)

Scroll to Top